The light & studio specialist
Ordered before 16:00, shipped the same working day
More than 3000 products
Expert staff with practical experience
Product description
Elinchrom ELC Pro HD 1000 Triple Studio Set 5.0
The Elinchrom ELC Pro HD 1000 Triple Set is a complete starter set for the professional photographer.
This set is equipped with 3 ELC Pro HD 1000 Compact 5.0 lamps, a real all-rounder and made for the serious professional work!
The lamp has many light and flash options. The OLED display, very clear and logical menu structure makes the setting of the lamp quickly an automatism. The halogen setting lamp with which the ELC is equipped has a power of 300W. with which you can see before the photo is made how the light gradient can be seen over the subject, model, product to be photographed. The modeling lamp can also be used as a video light (color temperature 3200K).
The flash is consistent with a color temperature of 5500K. The maximum flash power of the ELC Pro HD 1000 is 1048 Ws, which can be easily reduced to a minimum of 8 Ws digitally. The reloading times are extremely fast and the Swiss precision guarantees the consistent output - every time, photo after picture. In short enough power to be combined with the larger light formers and to highlight more people or subjects at the same time perfectly. And, on the other hand, to reduce that there is also a very subtle bright spot of the making.
It does not stop at the hardware. The ELCs are equipped with a built-in computer & built-in Skyport receiver, allowing full communication with a computer in the studio where virtually all studio setups and lamp settings can be stored. Because you do not have to invent the wheel every time, this possibility can also contribute to an enormous increase in the workflow. The software of the ELC is specially designed for this compact and gets the most out of the flash. This gives you as a photographer the freedom to make settings based on your personal wishes, for every situation.
And, as usual with Elinchrom, all available Elinchrom light shapers (Softboxes, reflectors, etc.) are interchangeable and combinable!
PRODUCT FEATURES: Elinchrom ELC Pro HD 1000 Triple Studio Set
- STROBO MODE: Enables you to take a picture with stroboscopic effects within a single frame. Simply experiment for the optimum result.
- DELAYED MODE: Provides the option of first or second curtain sync and everything in-between, plus predictive syncronisation within a short sequence.
- SEQUENCE MODE: Allows you to sequentially trigger up to 20 ELC’s, in bursts or as a continuous cycle, to utilise the highest frame rate of your camera.
- LOW POWER: The ELC Pro HD enables you to work with very low power flash and continious light.
- ENHANCED INTERFACE WITH CONTROL: Never before has there been a unit so close to the user. With highly precise control you can alter everything for a new user experience.
TECHNICAL SPECIFICATIONS: Compact Professional ELC PRO HD 1000
- Energy in Ws.: 1000
- F-Stop (1m, 100 ISO, reflector 48°): 90.8
- Standard Light Angle: 180° >
- Power range in f-stops: 8
- Power range in Ws: 8 - 1000
- Power range display: 0.3 - 7.3
- Power increments in f-stop: Adjusted by precise multifunctional power knob in 1/10e steps
- Flash duration t0.5 in s.: Min. power: 1/2780
- Flash duration t0.5 in s.: Max. power:1/1430
- Best flash duration at power: 3.6 (1/5260)
- Recycling 230 V in s.: Slow: 4.0 / Default: 1.5 / Fast: 1.2
- Recycling 115 V in s.: Slow: 5.0 / Default: 1.8 / Fast: 1.4
- Max. flash per sec. at min. power: 20
- Colour temperature °K at max power: 5500
- Auto Power Dump: Adjusts power settings automatically
- Power stability: ± 0.1%
- Voltage Multi-voltage: 90 - 265 V
- Modelling lamp mode: Off, free, proportional
- Modelling lamp 230 V: 300 W / GX 6.35 - EL23022
- Modelling lamp 115 V: 300 W / GX 6.35 - EL23030
- Flashtube: S-Type, Omega Plug-in, user replaceable, type EL24084
- EL-Skyport: Integrated transceiver, 20 Frequency Channels and 4 Groups with full RX features
- Synchronisation voltage: 5 V (compatible met alle camera's)
- Synchronisation socket: 3.5 mm Jack
- Fan Cooled: Electronically intelligent temperature controlled fan
- Umbrella fitting: Centred tube for ø 7 mm EL Umbrellas and standbracket with extra umbrella fitting for larger umbrella shafts
- Glass Dome Frosted, optional: EL24917
- Max. power consumption (230 V / 50 Hz) Slow: 350W
- Max. power consumption (230 V / 50 Hz) Default: 700W
- Max. power consumption (230 V / 50 Hz) Fast: 875W
- Pure Sine Battery Converter DC/AC : Slow recycle 600 W with Halogen
- Dimensions (with protective cap): 31.5 x 14 x 21 cm
- Weight: 2.9 kg (6.4 lb.)
IN THE BOX: The Elinchrom ELC Pro HD 1000 Triple Set consists of:
- 3 x Elinchrom Pro HD 1000 Flash Head (1000 Ws x 3 = 3000 Ws)
- 3 x Elinchrom Flash tube EL24084
- 3 x Elinchrom Modelling lamp
- 2 x Elinchrom Umbrella Reflector 16 cm / 90 °
- 1 x Elinchrom GP Reflector 18 cm / 70 ° (Reflector for the grid)
- 1 x Elinchrom Grid 18cm 30 °
- 1 x Elinchrom Snoot + grid
- 1 x Elinchrom Rotalux 50 x 130 cm, including bag, front & inside diffuser.
- 1 x Elinchrom Rotalux Softbox 135 cm, including bag, front & inside diffuser.
- 2 x Rotalux Speedring for Elinchrom lamps
- 1 x Elinchrom Umbrella ø 105cm Transparent / White
- 1 x Elinchrom Umbrella ø 105cm Silver
- 3 x Elinchrom Air ClickStand (3 air cushion Click stands )
- 1 x Elinchrom Skyport Transmitter Speed
- 3 x power cable
- 1 x Elinchrom Deflectorset (Gold, Transparent, Frost, Silver)
- 1 x Elinchrom ProTec Roller Case
- 1 x Dutch user manual
- 2 x 1 Year Warranty!
This set is exclusively available at FotoFlits.com
DOWNLOADS:
Click on the VIDEO Tab above to view the demo videos!